Support

Welcome Guest 

Show/Hide Header

Welcome Guest, posting in this forum requires registration.
Pages: [1]
Author Topic: Just to let flame peeps know
lwolf1
Newbie
Posts: 24
Permalink
Post Just to let flame peeps know
on: January 7, 2013, 22:35
Quote

flame/fire tablets carry 2 different versions of screens.

Make sure you check your screen model, qm or tm.

((settings)), all the way down to ((about tablet)).
then on right - see build number. should have a qm or tm at the end of the numbers.

do not update if you have no idea if that update is for TM or qm screens.
will mess up tablet,,,
Mutti0
Newbie
Posts: 4
Permalink
Post Re: Just to let flame peeps know
on: February 3, 2013, 09:00
Quote

Hi
Stuck at Ainol screen.
I tried this feiyu 0115.tm to get Jelly Bean. I got stuck at the 5 color Balloons screen.
I downloaded the last official version 9 from ainolstore.com . It worked but was a qm model ,plus lots of Chinese menu and software. Not the Uplay rom.
Tried to go again to the 0115.tm ROM stuck at the Black Ainol Flame Novo 7 Screen.
Were could I get the Uplay Rom ? Or any ideas whats wrong the Feiyu flash ?
I have a 4 and 8GB microSD . The tablet PDF is asking for a 1 or 2GB card. Not sure I can find one that small.
I have to pop the card after booting to get recovery. It still see's then rom on the SD card.
Never had a problem flashing several Tablet Before !

http://forums.ainolstore.com/topic/1555-feiyu-0115-ainol-novo-7-fire-feiyu-jelly-bean-412-firmware/page-4
Mutti0
Newbie
Posts: 4
Permalink
Post Re: Just to let flame peeps know
on: February 3, 2013, 09:45
Quote

Ok Think I found the Problem . After re flashing I did get the Boot Animation. Looks like a new Hardware issue. Need to find the Uplay Rom for .TM
Lifeiyu thread about firmware 20130115 (at bbs.ainol.com) appears modified on date 2013-01-22.

(thread is titled: [ROM发布] 烈焰 奇美/天马 英雄 4.12 飞羽自编译版 0115)
(thread link: http://bbs.ainol.com...&extra=page%3D1)

As far as I can see, this sentence is new:

* 新重力感应编号sn1211、1212等机子不支持，会卡死在开机动画

Raw translation via Google:

* The new gravity sensing No. sn1211, 1212, and other machine does not support, and will be stuck in the boot animation
I guess this advise would be useful for owners of the newer Fire.
Good luck !
This post has been edited by aprendroid: 22 January 2013 - 01:23 PM
Mutti0
Newbie
Posts: 4
Permalink
Post Re: Just to let flame peeps know
on: February 3, 2013, 17:32
Quote

K Guys Good news !
Theres a JellyBean Rom from Feb 2 thats good for newer G Sensors from Feiyu
Installed on the .tm version and Tablet working well so far !

Feiyu has released a new version of his rom for Ainol Fire tablets.
The new version called HSF - Happy Spring Festival - it's compatible with QM and TM screens and both types of accelerators (Bosch and Freescale).

To install it, just unpack the downloaded file and place it's two files (uImage_recovery and .zip file with the upgrade for your screen version) to a microSD card, power off your tablet, reboot into recovery (press and hold VOLUME- and POWER until you see the Android recovery menu) and perform the following in this order:

(use the VOL- to move within the menu and POWER to execute the selected option).

1. Wipe data/factory reset
2. Wipe cache
3. Install update from EXT (card). Select the .zip file you copied earlier in your microSD card and flash it.
4. Wipe data/factory reset
5. Wipe cache
6. Reboot

Here are the ROM links:

QM version
TM version

As always I am not responsible for the results.
I'm using it on my QM Fire and it's the best ROM so far, featuring optimizations in speed and execution of applications (plus, the battery meter issue is gone!).
Pages: [1]
Mingle Forum by cartpauj
Version: 1.0.34 ; Page loaded in: 0.027 seconds.